HOISTS - OTH

Robust gantry for high production applications, scalable from 500 to 12,000 lbs. Utilizes AC drives and absolute closed-loop positioning for both axes.

Model shown below rated for 2,000 lbs. total payload with a span of approximately 15 feet (tanks 10 feet front-to-back). Scaled designs for up to 12,000 lbs. total payload.

Typical configuration:

Horizontal Access

Length: Unlimited travel length, generally frame is five feet longer than travel requirement

Width: Front-to-back dimension of tankline plus minimum of 3 feet for walkway in front and 2 feet at rear of tankline for access to valves. Span does impact size of structural steel utilized (six to eight inch beams typical)

Construction: steel, with two part epoxy coating

Maximum Operating speed: 200 fpm (dependent on fixturing).

Driven by a 3 HP AC motor with absolute encoder feedback

Mounting: The unit can be floor mounted (U-shaped configuration) with vertical legs twelve to fifteen feet on center, or directly hung from a correctly designed overhead or beam

Vertical Axis

Stroke: 30+ inches

Min headroom: Tank height + stroke requirement + four feet

Construction: steel, with two part epoxy coating

Maximum Operating speed: 50 fpm (dependant on fixturing)

For the Adroit-OHT/2000, two polypropylene webbed belts are attached to a common shaft which is driven by 5 HP AC double helical brake motor gearbox, positioning by open or closed loop control depending on duty.

Electrical

Panel Construction: NEMA 12, coat finish. E-Stop structured link NEMA 4 upon request.

Power supply: 460 volt, 3 phase, 60 Hertz, 15 Amps per head (208 VAC or alternates are available)

Controls: PC-based interface with dedicated PLC for controlling AC full flux vector drives.

Typical Options

Multiple transports

Barrel rotation

Manual Operation Pendant with additional E-Stop; festoon-mounted or remote

Flashing Light during motion

Tank Lines

Amsax designs and fabricates modular tanklines from corrosion resistant materials focusing on tank integrity for long term service in industrial applications with advanced techniques...

Learn More...

Process Equipment

Amsax Technologies, Inc. has been supplying Process Equipment to the Metal Finishing Industry for over 25 years. Amsax's Equipment offers modular designs. Combined with our process...
Learn More...

Environmental Systems

Amsax will work with you to design an Environmental System that will meet local code. We can integrate new, used or existing equipment into an air ventilation system or wastewater...
Learn More...

Contact Amsax Technologies today!

Adroit Automation, Inc.

How to Reach Us

704 California Avenue • Rochester, PA 15074
phone: (412) 292-0127 or (412) 944-7400 • fax: (724) 201-0051
email: info@amsaxtech.com